Stainless Steel Wire Mesh for High Quality Screen Printing

Standard-Type BS
Using 25% higher tensile strength than standard SUS304, Standard – BS is our standard product which is adopted for wide use such as 100 micron fine line or thin deposit printing for MLCC.
It is also used for sieving and filtration industries.
Cross Section View
SEM Image
Specification
SPEC MESH
COUNT
WIRE DIA.
(mm)
OPENING
RATE
THICKNESS(μm) STRENGTH
INDEX
Normal Calender
SOFT MIDDLE HEAVY
 
BS-500/16
500 0.016 47% 36 ± 2 25 ± 2 20 ± 1 16 ± 1 0.50
 
BS-500/19
500 0.019 39% 41 ± 2 30 ± 2 25 ± 1 19 ± 1 0.71
 
BS-400/19
400 0.019 49% 39 ± 2 34 ± 2 30 ± 1 23 ± 1 0.57
 
BS-400/23
400 0.023 41% 55 ± 2 40 ± 2 35 ± 1 25 ± 1 0.83
 
BS-400/25
400 0.025 37% 57 ± 2 49 ± 2 40 ± 1 30 ± 1 0.98
BS-325/28
325 0.028 41% 62 ± 2 55 ± 2 47 ± 1 40 ± 1 1.00
 
BS-325/30
325 0.030 38% 62 ± 2 60 ± 2 47 ± 2 42 ± 1 1.15
 
BS-300/30
300 0.030 42% 68 ± 2 59 ± 2 50 ± 2 45 ± 1 1.06
 
BS-270/35
270 0.035 39% 77 ± 2 70 ± 2 58 ± 2 40 ± 2 1.30
 
BS-250/30
250 0.030 50% 62 ± 2 58 ± 2 50 ± 2 45 ± 2 0.88
BS-250/35
250 0.035 43% 78 ± 2 64 ± 2 57 ± 2 55 ± 2 1.20
 
BS-250/40
250 0.040 37% 90 ± 3 86 ± 2 72 ± 2 67 ± 2 1.57
BS-200/40
200 0.040 47% 82 ± 3 77 ± 2 72 ± 2 63 ± 2 1.26
※ "Strength Index" is the reference value setting BS325/28 to standard 1.0.
※ In order to practice high quality screen printing, we recommend "A Standard(★)" and "HS-D mesh(★★).
Back to Top