Our Products for Screen Printing are categorized as Standard, Hardmesh, Supermesh, 3D-mesh and Ultra-Hard mesh. They have their own mesh count, wire diameter, thickness, strength so that it can be selected depending on customers’ needs or printing applications.
As a standard mesh for screen printing, it’s has been adopted for wide use such as fine line or thin deposit printing for MLCC.
The tensile strength of these meshes has been improved to 30% greater than BS Standard. Higher printed resolution has been achieved through the development of 640 and 730 mesh.
Using stainless wires of high strength and low elongation, these meshes are woven with an open ratio of 60%. Thus, the transmittance of printing paste improves.
The wires are woven into a special weaving structure which yields a mesh 3 times thicker than the wire diameter; which is suitable for Thick Deposit printing.
The tensile strength of HS-D meshes is 3 times greater than BS-Standard. Produces more stable and dimensional accurate print. Screen printing potential will be further enhanced.
Woven wires are roll-calendering to be as thin as single wire diameter. Thickness uniformity will be further enhanced through this process.
Woven wires are blackened through surface treatment. It enhances printing resolution by preventing random light reflection during the UV exposure process.
Our Products are widely used for various fields of Filtration and Sieving applications. Higher tensile Stainless Steel Wire Mesh is excellent in durability and sieving efficiency. Nominal filtration Accuracy of Twilled Dutch 4860 mesh is about 2 to 3 microns.
The smaller weft wires are woven with a large warp wires without a space between the weft wires. Higher mesh count is suitable for a various precision filters.