Stainless Steel Wire Mesh for High Quality Screen Printing

Hardmesh-Type MS
MS-Hardmesh is woven with 30% higher tensile strength wires than BS-Standard to meet Screen Printing demands such as high dimensional accuracy and screen mask longevity.
We were successful in developing 640 or 730 mesh, which are mainly used in MLCC industries.
It is also appropriate for fine line printing and used for drawing 30 micron electrode lines in Touch Panel application.
Cross Section View
SEM Image
Specification
SPEC MESH
COUNT
WIRE DIA.
(mm)
OPENING
RATE
THICKNESS(μm) STRENGTH
INDEX
Normal Calender
SOFT MIDDLE HEAVY
MS-730/13
730 0.013 40% 28 ± 2 20 ± 1 18 ± 1 15 ± 1 0.63
MS-640/15
640 0.015 39% 35 ± 2 25 ± 1 21 ± 1 17 ± 1 0.73
 
MS-500/16
500 0.016 47% 36 ± 2 25 ± 2 20 ± 1 15 ± 1 0.65
 
MS-500/19
500 0.019 39% 41 ± 2 36 ± 2 25 ± 1 20 ± 1 0.93
 
MS-400/19
400 0.019 49% 42 ± 2 30 ± 2 23 ± 1 18 ± 1 0.74
MS-400/23
400 0.023 41% 55 ± 2 40 ± 1 35 ± 1 26 ± 1 1.08
 
MS-325/24
325 0.024 48% 51 ± 2 44 ± 2 38 ± 2 25 ± 2 0.96
MS-325/28
325 0.028 41% 56 ± 2 51 ± 2 45 ± 2 39 ± 2 1.30
 
MS-250/30
250 0.030 50% 62 ± 2 58 ± 2 45 ± 2 28 ± 1 1.15
※ "Strength Index" is the reference value setting BS325/28 to standard 1.0.
※ In order to practice high quality screen printing, we recommend "A Standard(★)" and "HS-D mesh(★★).
Back to Top